This topic contains 0 replies, has 1 voice, and was last updated by Me Mechanical Team 9 months, 3 weeks ago. Author Posts April 4, 2017 at 11:46 am #3069 Me Mechanical Team Keymaster Factors which are considered while designing of Fins: Fins should offer minimum resistance to flow of fluid. Manufacturing cost needs to be minimum. Fabrication and manufacturing need to be easy. Design should have light in weight. The thickness of the fin should be small. Effective thermal conductivity (k) of the fin should be large and heat transfer coefficient should be small. Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.