
Articles related to Manufacturing topic
A foundry shop is where the metal casting is prepared by melting and pouring the molten metal into moulds. Some commonly used tools in the foundry shop for the molding ..
A shaper machine is a reciprocating machine that produces horizontal, vertical, or flat surfaces. The shaper holds the single-point cutting tool in ram and the workpiece ..
Several techniques are used to improve the surface properties of manufactured components mechanically. The most common methods are listed and described under: Shot ..
The operator must go through and become familiar with these general safety precautions/recommendations to avoid accidents and injuries while working on the lathe ..
Electric arc welding is a fusion welding process. Welding heat is obtained from an electric arc between the work (or base metal) and electrode. An electric arc is produced ..
The tightening tools include pliers, screwdrivers and wrenches, which are discussed under. 1. Pliers Pliers are namely ordinary needle noses and particular types ..
A welding robot is an automated machine that performs welding tasks. Welding and robots go hand in hand. So it’s no surprise that robotic welding applications ..
Gas Tungsten Arc Welding (GTAW), also known as TIG (Tungsten Inert Gas) welding, the filler metal is supplied from a filler wire as shown in the figure below. ..
In Water Jet Machining (WJM) process, water jets alone (without abrasives) can be used for cutting. Thin jets of high pressure and high velocity have been ..
Gas Metal Arc Welding (GMAW) is also called metal inert gas (MIG) welding. In the gas metal arc welding process, the weld area is shielded by an inert atmosphere ..
Plasma Arc Welding (PAW) is an arc welding process; an entire plasma arc is produced and directed towards the weld area. The arc is stable and reaches temperatures ..
The die casting process is a manufacturing process for producing accurately dimensioned, sharply defined, smooth or textured surface metal parts. It is accomplished ..
The ease with which the forging process can be done is called forgeability. The forgeability of a material can also be defined as the capacity of a material to undergo ..
Various types of stakes are used to form the metal sheets in different kinds of shapes. The stake is a sort of anvil, which supports the sheet for sheet metal work. ..