Types of Keys

A key is a machine element fitted in an axial direction into the mating member, such as pulleys, gears. The key's primary function is to prevent the relative rotation between the shaft and mating member. In most applications, the keys' secondary function is to prevent the relative rotation between the shaft and mating member. In most applications, the keys' secondary function is to prevent relative movements in the axial direction of the shaft.

Cutting keyways reduces the shaft's strength and rigidity. Sometimes, setscrews are used to seat the key firmly in the keyway and prevent axial movement of the parts.

The following are the five common types of keys:

1. Square key: A square key is sunk half in the shaft and half in the hub of a gear, pulley or crank. Generally, a square key has sides equal to one-fourth of the shaft diameter.

2. Rectangular Key: Rectangular or flat keys are used where the shaft's weakening is serious and where added stability of the connection is desired, such as in machine tools.

Flat keys with a uniform cross-section are called feather keys. Otherwise, a taper of 1:100 is provided on the thickness while the width is kept uniform. A feather key permits axial movement of the hub on the shaft.

Tapered keys are often provided with a gib head, which facilitates their removal when the other end is inaccessible, but the gib head is dangerous for workmen.

3. Saddle key: Saddle keys fit in the key-way of the hub only; there is no key-way on the shaft. Saddle keys are suitable for light service or in cases where relative motion between shaft and hub is required for adjustment and the key way cannot be provided on the shaft. The power is transmitted by friction between the inner hollow cylindrical face of the key and the shaft. Sometimes, flat saddle keys are used in which the inner surface of the key is left flat and the shaft is planed off to accommodate the key.

4. Woodruff key: A Woodruff key is an adjustable sunk key in the form of an almost semi-circular disk of uniform thickness. The key requires a circular type of keyway in the shaft. It can be used with the tapered shaft because it aligns itself in the seat. The larger depth of the keyway prevents the key from slipping over the shaft, but it weakens the shaft more than the use of straight keys.

5. Tangent Key: Tangent keys are made in two parts, each tapered to ensure a tight fit. The face of the tangent keys is kept inclined.