Rivets: Different Types of Riveted Joints

Show/Hide Page Index

 

Rivet is used to connecting two or more plates inserted through the hole in plates and pressed on the other side.
Rivets
Unwin’s formula gives the diameter of the rivet hole for a given plate:
d = 6*t0.5
where, t = Thickness of plate in mm and
d = Diameter of the rivet in mm which is used to denote the dimension of the rivet.

Types of Rivets:

For steel plates, the rivets are made of low-carbon steel. The rivets in copper add to resistance against corrosion and aluminum rivets can be used to lower the weight of the structure.
Different types of Rivets Heads
Rivets with countersunk heads and oval countersunk rivets shown in the bottom image are not as strong as button head rivets. The countersunk head and oval countersunk rivets are used only when protruding rivet heads are objectionable. Pan heads and conical heads are less frequently used and are difficult to produce. Tubular rivets have a special deviation from solid rivet shank. Tubular rivets are used in aircraft.

Types of Riveted Joints:

The classification of riveted joints can be done in the following ways:

1. According to the purpose of rivets:

Based on purpose the riveted joints can be classified into three types:
1.1 Strong Joints: Strong rivet joints strength is the only criterion. These joints are used in engineering structures such as trusses, beams and machine frames.
1.2 Tight Joints: Tight rivet joints provide strength as well as are leakproof against low pressures. Joints in reservoirs, containers, and tanks fall under this group.
1.3 Strong Tight Joints: Strong tight rivet joints are used in boilers and pressure vessels and ensure both strength and leak proofless.
Classification of rivets based on purpose has no sound basis and is arbitrary. This classification of rivets helps to understand the basis of design and manufacturing.

2. According to the position of plates connected:

According to the position of plates connected riveted joints are classified into two types:
2.1 Lap joint: In a lap joint the edges of plates are simply laid over each other and riveted.
2.2 Butt joint: In Butt, joint plates lie in the same plane and are joined through cover plates.
Reference: Riveted Joints PDF by IGNOU – The People’s University

Spread the Knowledge
https://mechanicalengineering.blog/about/

'ME Mechanical' is an online portal for mechanical engineers and engineering students. Published hundreds of articles on various engineering topics. Visit our about section to know more.

All Comments

  • According to the head
    1-snap
    2-pan head
    3-pan head with tapered neck
    4-roundedcountersunk head
    5-falt countersunk head
    6-falt head

    saurabh Oct 13, 2015 5:43 pm Reply
  • Your expertise shines through in this post. Thank you for illuminating us with valuable knowledge.

    Ankit Singh Jul 24, 2023 4:57 pm Reply
  • Your willingness to share this wealth of information is truly appreciated. It’s like finding a treasure trove of wisdom.

    Ankit Singh Aug 4, 2023 3:50 pm Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.