Showing posts with the label Joining ProcessShow all

Gas Metal Arc Welding (GMAW)

Gas Metal Arc Welding (GMAW) is also known as metal inert gas (MIG) welding. In this process, the weld area is shielded by an inert atmosphere of argon, helium, carbon dioxide, or other gas mixtures. A wire-feed drive motor automatically feeds the consumable bare wire…

Read more

Plasma Arc Welding (PAW)

Plasma Arc Welding (PAW) is an arc welding process; an entire plasma arc is produced and directed toward the weld area. The arc is stable and reaches temperatures as high as 33,000°C. A plasma is a scorching ionized gas composed of nearly the same number of electrons …

Read more

Gas Tungsten Arc Welding (GTAW)

Gas Tungsten Arc Welding (GTAW), also known as TIG (Tungsten Inert Gas) welding , the filler metal is supplied from a filler wire as shown in the figure below. The tungsten electrode is not used during this welding operation; a constant and stable arc gap is maintaine…

Read more

Flux-cored Arc Welding (FCAW)

The flux-cored arc welding process (FCAW) shown in the image below is similar to Gas Metal-arc Welding , except that the electrode is tubular in shape and filled with flux. Cored electrodes produce a more stable arc, improve weld contour, and improve the mechanical pr…

Read more

Submerged-arc Welding (SAW)

In Submerged-arc Welding (SAW ), the welding arc is shielded by a granular flux of lime, silica, manganese oxide, calcium fluoride, and other compounds. Gravity flow through a nozzle feeds The flux into the weld zone from a hopper. The thick layer of flux completely co…

Read more

Shielded Metal-arc Welding (SMAW)

Shielded Metal-arc Welding (SMAW) is the simplest and is used for many joining processes. More than 50% of industrial and maintenance welding is currently performed by this process. In this welding operation, an electric arc is generated by touching the tip of a coate…

Read more

Types of Welded Joints

Different types of welded joints bring two parts together for joining. Five types of welded joints are butt joint, corner joint, lap joint, tee joint, and edge joint. 1. Butt joint: In Butt welded type, the parts lie in the same plane and are joined at their edges…

Read more